Art Hobby Hyper 1.5M HLG!
April 2, 2010
Here is a short build log with pictures and components installed.
I started building wings first. Pictures are louder than words.
Covering wing joint with glass cloth and gluing with some epoxy.
Applying lacquer and sanding. I have made three layers.
Cutting ailerons.
Installing servos and servo covers.
Installed servos are Blu Bird BMS-306DMAX
Assembling fuselage and tail boom.
Installing push rods.
Assembling V-tail.
Installing tow hook.
Making pieces of lead for balancing.
Finishing the model.
Servos for elevator/rudder are 2 x Servos Blu Bird BMS-306DMAX
Power supply:
1 x Corona Synthesized Dual-Conv Receiver 6Ch 40Mhz
Finished model and ready for maiden flight.
Maiden flight was on the nearest slope. I can say that this model is more suitable for slope soaring than flat terrain. The plane is very agile and capable of aerobatics.
